Bitwriter cable
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50455
Printed Date: June 02, 2024 at 9:18 PM
Topic: Bitwriter cable
Posted By: swamprat323
Subject: Bitwriter cable
Date Posted: February 19, 2005 at 5:43 PM
Were can i buy just the cable for this. I had severl customers come back and ask to change some settings on it. i rater just kept one in or make them my self. Depends how cheap i can get them i rather buy them, or i can make them if i can find the 3 wire "plug with terminals. This be a lot easier then to open the dash back up.
Does any one eles do this.
Thanks Kyle
Replies:
Posted By: JWorm
Date Posted: February 19, 2005 at 5:55 PM
My shop leaves one in every car we do. We leave it tie wrapped to the OBDII plug. They cost less than $1 each. You can order them directly from DEI when you place an order. They come 5 to a pack.
Posted By: swamprat323
Date Posted: February 19, 2005 at 6:05 PM
Im not a DEI dealer. Any one know some that sells them. I email a few compies see waht they say, if not i do know of a compay that will make the plug for me.
Posted By: vinman75
Date Posted: March 03, 2005 at 2:43 AM
All it is is a three wire door lock plug like on the dei brains. We make them out of autopage door lock harnesses because they have three wires in them, then all you need to do is connect them in between with primary wire.
|