Proper way to wire Starter Kill/Anti-grin

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50511
Printed Date: May 15, 2025 at 5:09 AM

Topic: Proper way to wire Starter Kill/Anti-grin

Posted By: Anthnynixon
Subject: Proper way to wire Starter Kill/Anti-grin
Date Posted: February 20, 2005 at 6:22 PM

Is there really a correct way to wire a starter kill/Anti-grind relay. I have been searching and finding all different ways of wiring it. Would this way be alright

86 - (-) when armed
87a - starter wire engine side
30 & 85 - starter wire key side

This seems like the easiest way and was wondering if this works correctly?

Replies:

Posted By: profuse007
Date Posted: February 20, 2005 at 9:07 PM

thatll somewhat work but that diagram its saying, interrupt the starter wire and engage the starter at the same time so thats kinda off beat there.

do it like this:
85-(-)when armed and a (-) when RS, diode isolate the two.
86-(+)ignition (not acc)
30-starter side
87a-key side (doesnt matter whcih side)

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Print Page | Close Window