529T Problem Plz Help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50602
Printed Date: May 09, 2025 at 9:28 PM

Topic: 529T Problem Plz Help

Posted By: vxtecz
Subject: 529T Problem Plz Help
Date Posted: February 22, 2005 at 4:02 AM

Hi

I wired the module everything up and everything is working but the problem is when arming the car the sunroof closing then it tilt/vents... I searched the forums but there wasnt ne help...please help.. this is for a 01 Acura CL Type S. and I also need a diagram for a relay on Back-UP battery.. i have a 2.2 amp good enough to trigger the alarm when disconnecting the main battery. thanks

Replies:

Posted By: mxxmikexx
Date Posted: February 22, 2005 at 3:28 PM

i just pulled up the tech info from dei on your car and they dont list the sunroof close wire, which normally means they dont recommend hooking it up, which may be why your experiencing the problem your having. with it venting after it closes

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106

Posted By: vxtecz
Date Posted: February 23, 2005 at 3:44 AM

help?

Posted By: bretbowman
Date Posted: February 26, 2005 at 6:34 AM

I'm hoping to wire mine as well - I have a 529T on the way for a 2002 Toyota Sequoia. I'll see what kind of luck I have. I know that DEI doesn't recommend doing the same on mine. Never stopped me before.

-------------
2002 Toyota Sequoia Limited 2WD (Clifford G5 Avantguard 5 w/ 2 SmartWindows modules) - IT Engineer - NRA Life Member - LDS Return Missionary - Married for time AND ETERNITY - Eternally sealed family

Posted By: bretbowman
Date Posted: February 26, 2005 at 10:48 PM

This CAN be done. There is a work around in the following thread.... read down into the thread, these guys were able to figure it out. I'll probably apply their method to get it to work. (you need to make the car think that the button is being pushed while the sunroof closes (it's all in the wiring).

https://www.the12volt.com/installbay/forum_posts.asp?tid=49914&KW=sunroof+529