Print Page | Close Window

Viper 550esp chirp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50618
Printed Date: May 03, 2025 at 3:22 PM


Topic: Viper 550esp chirp

Posted By: pyglion84
Subject: Viper 550esp chirp
Date Posted: February 22, 2005 at 1:28 PM

i dont know what i did but my alarm no longer chirps when i hit lock/unlock. and the alarm no longer goes of on impact. i havent tried to set it off by opening the door yet. i also noticed that the LED stays solid. it does not blink. any help would be nice.

-------------
Brandon



Replies:

Posted By: 13 volts
Date Posted: February 22, 2005 at 1:33 PM

The alarm is in VALET mode. 2 ways to turn on and off. Open the car door and press left right left on your remote (Left is unlock or button 1. Right is Unlock or button 2) The other way is: car door open, ignition key to run position then off then quickly press the valet/override button. This is a common problem with the DEI (Viper, Sidewinder, etc) alarms. Owner's manual explains everything.




Posted By: pyglion84
Date Posted: February 22, 2005 at 1:34 PM
awesome thanks a lot. i looked in there but i was looking in the wrong spot. thanks a lot

-------------
Brandon



Posted By: jnyunzal
Date Posted: February 22, 2005 at 8:06 PM

pyglion84 wrote:
i dont know what i did but my alarm no longer chirps when i hit lock/unlock. and the alarm no longer goes of on impact. i havent tried to set it off by opening the door yet. i also noticed that the LED stays solid. it does not blink. any help would be nice.

You may have activated the valet switch. Try switching ignition key on, then off and push valet switch the number of times as it was programmed.



-------------
kumpare


Print Page | Close Window