Print Page | Close Window

quick question

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50623
Printed Date: May 03, 2025 at 2:58 AM


Topic: quick question

Posted By: srfertig
Subject: quick question
Date Posted: February 22, 2005 at 2:54 PM

I have a Clifford Matrix 2.5x and I am getting it reinstalled after taking it out of a previous vehicle. I have a mercury switch, reed switch and a few sirens that go with the system, but to save money on labor I wanted to install them later myself. Is there any problems with this, or should everything work after I plug it into the brain.

Thanks-



Replies:

Posted By: srfertig
Date Posted: February 22, 2005 at 4:12 PM
I really need to know so I can get it installed soon. Would I need a bitwriter to get the above mentioned to work? Any help would be great.


Print Page | Close Window