door locks 97 suburban

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50633
Printed Date: May 02, 2025 at 4:07 AM

Topic: door locks 97 suburban

Posted By: rickgood
Subject: door locks 97 suburban
Date Posted: February 22, 2005 at 5:08 PM

hey guys - just wondering if i have to tap the factory relays to trigger the door locks or do i need ti install additional relays. This 97 Suburban has factory keyless entry.

Thanks Rick

Replies:

Posted By: profuse007
Date Posted: February 22, 2005 at 6:16 PM

Posted By: rickgood
Date Posted: February 22, 2005 at 6:39 PM

i thought i had to tap into the relay harness above the pedals. The alarm is a compu star 1 way.

Rick

Posted By: p/t installer
Date Posted: February 22, 2005 at 6:59 PM

i own a 99 suburban which is still old style with the newer interior and i found my factory keyless entry module above the gas pedal it is a small black box and the wire colors are still the same. "type a" positive lt. blue for lock, and white for unlock. on other chevy trucks that i have done installs on i found the same color wires low in the drivers kick panel there are a few harnesses in the kick just keep pulling them out of the hole in the metal till you see a harness with lt. blue, and white in it. oh and your compustar 1 way will have no problem powering those wires without relays i use compustar also and they're great they supply 500 ma of current which is more than enough for your truck, just hook up the wires accordingly and hit the button, i believe compustar uses dual polarity door lock wires, so read the install manual and hook it up good luck, and have fun