Accord with Compustar 2W900FMR-AS
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50648
Printed Date: May 07, 2025 at 7:09 PM
Topic: Accord with Compustar 2W900FMR-AS
Posted By: banyaim
Subject: Accord with Compustar 2W900FMR-AS
Date Posted: February 22, 2005 at 8:41 PM
Can anyone tell me if this system can do driver's priority unlock like the factory remote keyless entry? First button press unlocks driver's door, second button press unlocks all others. I would like the Compustar to do the same thing. The dealer said he could only wire it for driver's door unlock or all doors unlock with button I. Is he right?
Replies:
Posted By: banyaim
Date Posted: February 22, 2005 at 8:44 PM
Its a 2000 Accord 4-door.
Posted By: Velocity Motors
Date Posted: February 22, 2005 at 10:34 PM
Yes it can, but you have to access the driver's door unlock wire via the motor ( yellow on the EX and lt. GREEN/ red on the LX )
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: banyaim
Date Posted: February 24, 2005 at 8:31 PM
Jeff, I remeber the installer telling my that it "could" be done but would cost extra since he would have to run wire to the doors. As it stands now, the Compustar system is using the factory module for door locks and trunk release. I guess my question was could the drivers priority unlock be done through the factory module? Now that I think about it, would it be better to hook the Compustar system directly to locks/trunk bypassing the factory system completely or to take advantage of it? Mike
Posted By: Velocity Motors
Date Posted: February 24, 2005 at 9:44 PM
What I normally do for driver priority door unlock is grab the motor wire ( having to run the trigger wire through the door boot into the cab ) and then wire it to the 1st unlock wire on the Compustar and then wire the second unlock wire to the OEM module. Retaining the OEM module and using the wire there will be easy. Take advantage of this and use the wires given.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: banyaim
Date Posted: February 25, 2005 at 5:52 PM
Thanks
|