Integra Horn Alarm Hook to Viper

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5071
Printed Date: August 24, 2025 at 3:17 PM

Topic: Integra Horn Alarm Hook to Viper

Posted By: ninja8oi
Subject: Integra Horn Alarm Hook to Viper
Date Posted: November 03, 2002 at 2:39 AM

Hello. I was wonder if anybody can tell me how to hook up a 95 integra horn output to a Viper alarm system. Thanks. And also my alarm makes a 3 rd chip when i arm it which means a zone is not closed. how would I be able to pint point the exact location. I have 2 windows modules installed. could that be the problem.

Replies:

Posted By: SOUND PRESSURE
Date Posted: November 03, 2002 at 2:51 AM

Check your trunk, hood pin. Possible rust or bad connection. Check the led for number of flash confirmation and go back into the d.e.i. manual for troubleshooting code verification per led.

-------------
Sound Pressure

You know you have the right amount of pressure when your eyes start to water! Now you've got Juice!

Print Page | Close Window