how to uninstall an immobiliser?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50767
Printed Date: May 03, 2025 at 7:06 AM

Topic: how to uninstall an immobiliser?

Posted By: LEW15
Subject: how to uninstall an immobiliser?
Date Posted: February 24, 2005 at 1:13 PM

I have my friends car for the week as i was changing some parts on it, it has a bulldog alarm and a moss immobiliser on it, i disconnected the battery, and now it won't start. I asked my friend about it and he said he doesn't use the alrm or the immobilser, he said if i'd be able to take it out.

Does anyone know how to unistall a immobiliser, so the car will start?

Thanks

Lewis

Replies:

Posted By: jaurora
Date Posted: February 24, 2005 at 3:39 PM

Are you looking to remove the factory immoblizer or an after market bypass for remote start?

This would have nothing to do with the car not starting with the key. You should still be able to start the car with a key. But if you reset the alarm you might have to disarm the system in order to start the vehicle. If you dont have the keypad for the alarm use the vallet overide switch.

-------------
MECP certified (If it really means anything)
Jeremy

Print Page | Close Window