Print Page | Close Window

1987 Mercedes 300E Remote Start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5078
Printed Date: August 22, 2025 at 7:42 AM


Topic: 1987 Mercedes 300E Remote Start

Posted By: sach_deva
Subject: 1987 Mercedes 300E Remote Start
Date Posted: November 03, 2002 at 11:22 AM

Hey guys,

  I was wondering how would I go about wiring the remote start part of the alarm? So far got to the Starter, Ign1... I need to get to Ign 2, and the tach wire.  But what I was wondering is that on the alarm brain there's an ignition output, so do I wire that too, it was shown wired to a relay but that's it. So what do I do next? BTW it's a Crimestopper CS9711RS




Replies:

Posted By: Velocity Motors
Date Posted: November 04, 2002 at 8:54 AM

|          STARTER|purple              |+  |access by pulling           |
|         IGNITION|pink/red            |+  |instrument cluster          |
|  SECOND IGNITION|pink / YELLOW(2nd acc)|+  |                            |
|        ACCESSORY|pink/green          |+  |out of front of dash        |

|FCTRY ALRM DISARM|GREEN/ YELLOW        |-  |door harness or alarm       |
|       TACHOMETER|black, GREEN/ yel *1 |   |coil left inner fender      |
|       BRAKE WIRE|BLACK/ RED / white     |+  |brake switch or alarm       |

The wires listed above are what you need to connect on the car in order to make the RS portion of the Crimestopper work.



-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA



Posted By: sach_deva
Date Posted: November 04, 2002 at 7:39 PM
hmm thanks but that alarm has no input for accessory, is that okay for the car?

-------------


Print Page | Close Window