hellfire alarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=5082
Printed Date: August 22, 2025 at 1:30 AM

Topic: hellfire alarm

Posted By: dyer
Subject: hellfire alarm
Date Posted: November 03, 2002 at 12:39 PM

I have a hellfire alarm. However, I have no manual! Maybe someone can help! The wires are in the following order (left to right): White(fused), Red(fused), brown, black, orange, grey, green, blue, violet, yellow. All I really need to know is where the door trigger outputs are. Also a motionsenson came with the alarm. It is made by spider automotive electronics inc. It is model MD1. It has a red and brown wire. Where do these go. I know this is a lot, but any help would be great. I tried visiting harrison-hellfire.com, but i couldn't find any help.

thanks,

dyer

-------------
Dyer

Replies:

Posted By: Velocity Motors
Date Posted: November 04, 2002 at 8:47 AM

Here is their website. Maybe they will email you ar fax you a copy of the required diagram: https://www.harrison-hellfire.com/index.shtml

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: alarmpro
Date Posted: November 04, 2002 at 10:10 PM

Most Possible

white fused = flashing lights

red fused = positive constant

brown = +siren output

black = - negative

orange = - starter cut relay output

gray = ?? possible 2nd channel output

green = - door trigger

blue = - trunk / hood trigger

violet = + door trigger

yellow= + switched ignition

Good Luck These are the most possbile outcomes.

Print Page | Close Window