Print Page | Close Window

Viper 350esp door lock for ’04 Tacoma

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50833
Printed Date: May 11, 2025 at 9:55 AM


Topic: Viper 350esp door lock for ’04 Tacoma

Posted By: ciraya
Subject: Viper 350esp door lock for ’04 Tacoma
Date Posted: February 25, 2005 at 1:15 PM

Hey,

I am having a problem connecting my alarm to lock my doors. The car came with a keyless entry system that would unlock the driver side door with one push on the remote and both doors with a second push. The problem is that I want to have my Viper alarm do the same thing. I tried connecting to the wires that the wiring diagram suggested, but it doesn't work. I think it has something to do with the fact that the factory relay is a 5 wi setup. Does anyone know how to set up my alarm for this type of system? I am also not sure where the relays are in the truck, so I cannot connect the alarm directly. I am sure I could hook the alarm up to my lock/unlock switch, but I would really like to have the option to unlock one door at a time, instead of both.

Any help would be appreciated.




Replies:

Posted By: KarTuneMan
Date Posted: February 25, 2005 at 7:57 PM
Does the viper HAVE an output dedicated for drivers door priority?

-------------



Posted By: nava94
Date Posted: February 25, 2005 at 10:13 PM
If you wanted that same feature for your alarm you should have bought the Hornet 700T. This is a DEI alarm upgrade for vehicles that come equipped with factory keyless entry. You use the factory remotes to arm/disarm your alarm staying with the same features you are asking for.


Print Page | Close Window