Clifford alarm questions
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50858
Printed Date: July 14, 2025 at 6:52 PM
Topic: Clifford alarm questions
Posted By: stormcrow
Subject: Clifford alarm questions
Date Posted: February 25, 2005 at 6:26 PM
I'm fitting an Eagle II into my Mondeo/Contour (as per previous posts) but need help!
a) What is the thick white wire coming out the side of the alarm brain? Is this the antenna wire? It is only about 5 inches long...
b) How exactly do I fit the extended range receiver? It was wired in manually to the connections on the alarm's ancillary sensors (eg Volumetric Radar Sensor and Piezo sensor) but I'm not sure that is right...
Please can someone help?!
Thank you.
Peter Butler, UK
Replies:
Posted By: bretbowman
Date Posted: February 26, 2005 at 5:36 AM
White wire out is usually parking light flash OUTPUT. At least on my G5 Avantguard 5 system - I believe that they're all the same on Cliffords.
-------------
2002 Toyota Sequoia Limited 2WD (Clifford G5 Avantguard 5 w/ 2 SmartWindows modules) - IT Engineer - NRA Life Member - LDS Return Missionary - Married for time AND ETERNITY - Eternally sealed family
|