Print Page | Close Window

viper 300esp ign door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50869
Printed Date: July 15, 2025 at 8:03 AM


Topic: viper 300esp ign door locks

Posted By: Ben.c
Subject: viper 300esp ign door locks
Date Posted: February 25, 2005 at 8:41 PM

Could some one please help me turn off ignition cotroled door locks on a viper 300 esp .

 thanks



-------------
ozy installer



Replies:

Posted By: ken984
Date Posted: February 25, 2005 at 9:44 PM
ok, make sure you have the door pin connected first..then turn the ignition on then off..then hold the balet button in until the alarms chirps once...then let off...then press it 4 times and after the 4th press HOLD it down..the alarm should chirp 3 times...now press button II on the remote the alarsm chould chirp twice indicating that you have turned the feature off. Let the valet button go and after 15 seconds the alarm will wail to indicate that programming mode is now off. Or you can turn the key on and that will end the programming sequence.
It is MUCH easier to do with a Bitwriter.
good luck



Posted By: Ben.c
Date Posted: February 25, 2005 at 10:48 PM
Thanks heaps for your help. It was very much appreciated.  We couldn't find the install manual anywhere, as usual we have "put it somewhere safe".

-------------
ozy installer


Print Page | Close Window