2004 jeep liberty alarm install

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50901
Printed Date: June 22, 2025 at 1:08 AM

Topic: 2004 jeep liberty alarm install

Posted By: derfnigel
Subject: 2004 jeep liberty alarm install
Date Posted: February 26, 2005 at 11:33 AM

Im installing a viper 690xv in a 2004 jeep liberty.Im having problems with parking lights i know iv got to use a relay and a resistor some say a 1000 ohm others say a 910 ohm with 5 % tolerance.I was thinking of useing a standard polarity inverting wireing for the relay https://www.the12volt.com/relays/page1.asp. Can anyone help?

Replies:

Posted By: boomer_106
Date Posted: February 26, 2005 at 11:42 AM

The diagram I see says a 900 ohm resistor. Another says 910 like you said. If you have a positive output only for parking lights on your viper than just use the relay diagram to convert to negative like you are thinking of doing. Sounds like you're on the right track.

Print Page | Close Window