01 Accord Alarm issue

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50914
Printed Date: June 21, 2025 at 12:45 PM

Topic: 01 Accord Alarm issue

Posted By: Teamrf
Subject: 01 Accord Alarm issue
Date Posted: February 26, 2005 at 2:37 PM

I recently changed my lock and unlock wires for my car to the wires that arm and disarm the factory alarm while also locking the car. Now when I remote start my car..the horn honks. Do I need to hook up the disarm defeat wire as well? The only reason I want to have the factoy alarm hooked up so the horn honks while the alarm is going off. And I really don't want to use a relay for it if the car can do it just by hooking up different wires. Any suggestions?

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Replies:

Posted By: Teamrf
Date Posted: February 26, 2005 at 7:36 PM

01 Accord, and a Clifford RSX3.5

-------------
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.

Posted By: chris354
Date Posted: February 26, 2005 at 8:37 PM

Is it an lx or ex

Posted By: profuse007
Date Posted: February 27, 2005 at 12:42 AM

sounds like a EX. youll need to use the disarm wire, grn/blk on rsx3.5, (if i remember) w/ a relay to the blue wire at the door.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).