Print Page | Close Window

NISSAN REMOTE START PROBLEMS

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50922
Printed Date: May 03, 2024 at 9:23 AM


Topic: NISSAN REMOTE START PROBLEMS

Posted By: Snowjoe69
Subject: NISSAN REMOTE START PROBLEMS
Date Posted: February 26, 2005 at 5:28 PM

I have installed a Performance Tecknique Alarm System with remote start onto a 2004 Nissan Altima. Everything on the system works fine except the remote start. I was able to start the car about nine times in a row at first then once the morning. Untill recently I found out that there is a  second starter wire that needed to be hooked up. How should this wire be connected with only one output start wire from the alarm system? And does this nissan need an alarm bypass for the key? I have not been able to get it started since install. Please Help!! xx( Thank You.

                                  Joe



-------------
Joe



Replies:

Posted By: KarTuneMan
Date Posted: February 26, 2005 at 6:02 PM

use the output (starter) to control another relay, to feed the second starter.fuse the second starter reay properly.

Yes you need a bypass

https://www.bypasskit.com/



-------------




Posted By: radkonn
Date Posted: February 26, 2005 at 7:11 PM

I had the same question a month ago about the second starter wire. Here is how I wired it up in my Nissan Frontier Crew Cab.

https://www.commandocaralarms.com/2ndstarterwire.asp

Second Starter Wiring




Posted By: radkonn
Date Posted: February 26, 2005 at 7:20 PM

I had the same question a month ago about the second starter wire. Here is how I wired it up in my Nissan Frontier Crew Cab.

Second Starter Wiring




Posted By: radkonn
Date Posted: February 26, 2005 at 7:22 PM

Try my second reply link. I wish the had an edit feature.




Posted By: Snowjoe69
Date Posted: February 26, 2005 at 9:27 PM
Thanks a lot guys, I'll try this stuff out and see what happens.

-------------
Joe





Print Page | Close Window