Print Page | Close Window

96 Voyager Factory Alarm Interfacing

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50956
Printed Date: June 20, 2025 at 1:59 PM


Topic: 96 Voyager Factory Alarm Interfacing

Posted By: Komobu
Subject: 96 Voyager Factory Alarm Interfacing
Date Posted: February 27, 2005 at 5:59 AM

Hi;

I am installing a Autopage rs855 on a plymouth voyager. There is a wire coming off the autopage unit to disable the factory alarm during starting. I have read the code sheets and I haven't seen anything refering to this wire. Could you please help me out and tell me what wire this is and where I can find it? Thanks for any help

Pat



Replies:

Posted By: boomer_106
Date Posted: February 27, 2005 at 11:02 AM

Plymouth

Voyager

1996-2000

Alarm and Keyless  Entry Wiring Colors and Notes

Function

 

Vehicle  Color

Location

Constant  +12 Volts:

 

PINK/BLACK, RED & PINK

IGNITION SWITCH HARNESS

OEM Alarm Disarm:

 

WHITE/ RED (-)

IN DRIVER KICK PANEL *****

Dome  Lights/Superv:

 

BROWN / L GREEN (-)

GRAY # PIN CONNECTOR AT FUSE BLOCK***

OEM Horn:

 

BLACK (-)

STEERING COLUMN HARNESS

Power  Lock:

 

WHITE/ D GREEN

BLACK # PIN CONN. IN DR. KICK ****

Power  Unlock:

 

SINGLE WIRE SYSTEM

BLACK # PIN CONN. IN DR. KICK ****

Trunk  Release:

 

N/A

Alarm  Input Wire:

 

BROWN / L GREEN (-)

GRAY # PIN CONNECTOR AT FUSE BLOCK***

Notes:

See Note #211 - Chyrsler/Dodge Mini Van Single Wire Door Locks Diagram. ***** Wire Located at BCM in Connector Closest to the Kick Panel; A Negative Pulse Through A 665 Ohm ResistorDisarm and Unlock the Doors and A Negative Pulse Through A 4020 Ohm Resistor Will Arm and Lock the Doors.





Print Page | Close Window