viper 791xv stopped responding

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=50977
Printed Date: May 15, 2024 at 5:18 AM

Topic: viper 791xv stopped responding

Posted By: wblakes
Subject: viper 791xv stopped responding
Date Posted: February 27, 2005 at 2:24 PM

i had this unit installed about 6 months ago with no problems until yesterday. my remote won't sent any signal to the brain. it doesn't give beeps or anything after i push a button. when the alarm is triggered it sends an alarm to my remote and my remote shows the alarm icon. i had unplug overnight and still doesn't work. i disconnected the antenna and push a button; my remote beeps back that it has no signal. but if i plug the antenna in, the remote doesn't beep or anything. i try to relearn the remote; didn't work. i know the brain is working because i send a pulse to the WHITE/ blue wire (activation input) and the car started.

Replies:

Posted By: chris354
Date Posted: February 27, 2005 at 6:29 PM

Try removing battery and reinstalling it in the remote. I had a python about a week ago that would transmit but would not receive and worked for me.

Posted By: wblakes
Date Posted: February 27, 2005 at 6:55 PM

yeah, i tried that. took it out and left it out for an hour.

Posted By: Javelin3o4
Date Posted: February 27, 2005 at 8:35 PM

got kinda the same issue with my clifford 3.5 except i can get mine to work by squeezing the corner by the antenna on the remote hella hard then pressing the lock/unlock button, i gotta call dei and get a new remote.