door trigger/ relay help

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51067
Printed Date: May 13, 2025 at 3:30 PM

Topic: door trigger/ relay help

Posted By: 02SS
Subject: door trigger/ relay help
Date Posted: February 28, 2005 at 9:17 PM

I am installing a Clifford Intellivoice alarm into my 1957 chevy truck with up to date wiring. My question is how do I wire up a relay that ties both door pin switches to domelight in alarm. Any kind of diagram would be great.

Replies:

Posted By: dare_ds69
Date Posted: March 01, 2005 at 7:13 AM

you don't need a relay, you can use both wires and diode isolated each wire. if you need diagram check diodes section in this web.

-------------
how own your mind, control your life.
MECP certified. always use a DMM

Print Page | Close Window