matrix 3.5 no respone or led pulse?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51213
Printed Date: May 03, 2024 at 1:37 AM
Topic: matrix 3.5 no respone or led pulse?
Posted By: jaykillahoe
Subject: matrix 3.5 no respone or led pulse?
Date Posted: March 03, 2005 at 11:41 AM
i need help i can't get my alarm to respond. i press the arm button on my remote but it justs beeps, when the sensors are triggered i can see it recieve but ther is no chirps or led flashes. what do i do, do i have ny connections on correctly and where is a good place to place the orange -500mA wire too.
-------------
jay
Replies:
Posted By: jaykillahoe
Date Posted: March 03, 2005 at 11:50 AM
soory every one for the double post i didn't know if isent it or not help please ------------- jay
Posted By: steiny83
Date Posted: March 03, 2005 at 3:27 PM
what is the function of the orange wire?? If your siren and led's don't work, I'd check their wires...hard wire them with + and - signals and make sure they actually make a sound/flash...after that, be sure they're plugged into the right parts of your alarm...if they are, check for a short circuit in the wires between them...if there's no short, make sure the alarm sends a signal when you trigger it....do you have the manual? you'll have to check that for the orange wire...
Posted By: jaykillahoe
Date Posted: March 03, 2005 at 4:48 PM
i'll try that thanks get back to you soon
-------------
jay
Posted By: jaykillahoe
Date Posted: March 03, 2005 at 6:13 PM
didn't work no response
-------------
jay
|