Print Page | Close Window

Dodge ram 1500 1997 door locks

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51232
Printed Date: May 03, 2024 at 7:17 PM


Topic: Dodge ram 1500 1997 door locks

Posted By: brianh
Subject: Dodge ram 1500 1997 door locks
Date Posted: March 03, 2005 at 5:25 PM

I installed a R.S unit on this vehicle today and everything went fine. Except for the door locks that is. I have them unlocking from the remote(R.S. remote)but they will not lock. This vehicle does not have keyless entry on it. I am using relays in the reversal rest configuration. That will let the locks unlock. I cant fiqure out how to make them lock. I have tried the positive pulse on the lock wire and that wont do it. I have tried the reversal rest on the lock wire and it wont work either. the locks work fine from the switch aty the drivers door. Any info would be greatly appreciated on this matter. Thanks in advance.

-------------
Brian
owner/installer
Sight & Sound Car Stereo

"all electronic equipment runs off of smoke, once you let it out, it stops working"



Replies:

Posted By: dare_ds69
Date Posted: March 03, 2005 at 7:41 PM
posted_image
Power Lock ORANGE / purple    lt blue plug in driver kick
Notes: Positive trigger on models with factory keyless entry, and 5 wire on all other models.
Power Unlock pink/purple    lt blue plug in driver kick
Notes: Positive trigger on models with factory keyless entry, and 5 wire on all other models.

you have to use two relays one for lock and one for unlock

86 12v fused

8712v fused

87a orange purple switch side

30 motor side

85 lock  (-) from r/s

do the same for unlock



-------------
how own your mind, control your life.
MECP certified. always use a DMM




Posted By: brianh
Date Posted: March 04, 2005 at 7:23 AM
I have tried that and it works fine for the unlock. That configuration will not work for lock. I have tested my relays,power on all pins,the outputs from the unit,ect... The tech support I use is also stumpped. Any other ideas?

-------------
Brian
owner/installer
Sight & Sound Car Stereo

"all electronic equipment runs off of smoke, once you let it out, it stops working"




Posted By: jkxmlr
Date Posted: March 05, 2005 at 1:08 PM
Info needed!!!  If you truly want help. R/S brand, model  #, vehicle type, model,  year.   With that info, someone might have had yor problem and solved it already.





Print Page | Close Window