autopage 750

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51249
Printed Date: May 01, 2025 at 8:15 PM

Topic: autopage 750

Posted By: zargon
Subject: autopage 750
Date Posted: March 03, 2005 at 8:34 PM

sorry on my previous post i said it was a 720 but it is a 750, I need to know what wire is door trigger and how to program tach? iam going to be here late i can tell, help me!!!!!

-------------
zargon ruler of estranorth

Replies:

Posted By: radkonn
Date Posted: March 03, 2005 at 9:40 PM

\

I tell you what the door trigger is and how to program the tach for a 855. I don't know how similar they, but let me know if you need the info.

Posted By: radkonn
Date Posted: March 03, 2005 at 9:45 PM

I found the install manual on this site. Here is the link.

750 lcd install manual

Posted By: blashmeny
Date Posted: March 13, 2005 at 8:42 PM

i have a rs 750 autopage every thing works except when i use the remote to start the car it dies right away ive tried reprograming it im stuck. any suggestions would help alot thanx

Posted By: Komobu
Date Posted: March 13, 2005 at 11:34 PM

blashmeny...The reason for the tach sensor is so that the remote start unit will know when the car is running and dis-engage the starter from cranking after the vehicle starts. In a lot of newer cars, that is done automatically by the vehicle. To see if your car is one that does it automatically, attempt to start your car, but leave the key fully turned after the car starts. If you hear the starter whining, then you know your dis-engage is not automatic. If your starter does automatically dis engage, as I suspect, dont be affraid to program the autopage by time instead of tach. Use a long crank time. This will prevent you from having to tap into another wire.

Pat