Print Page | Close Window

DEI 300ESP and 561T

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51322
Printed Date: May 09, 2024 at 9:58 AM


Topic: DEI 300ESP and 561T

Posted By: gudel
Subject: DEI 300ESP and 561T
Date Posted: March 05, 2005 at 1:12 AM

I have a DEI viper 300 ESP installed and I would like to add a remote starter.

I'm looking for wiring connection info between the Viper unit and the remote starter unit. Is there like a generic compatibility or wiring link betwen DEI products?




Replies:

Posted By: auex
Date Posted: March 05, 2005 at 8:31 AM
The only interaction between the two is the WHITE/ blue acc output and ign, the module supplies the alarm ign so the alarm doens't freak out when the car starts while the alarm is armed. That is all, well maybe sensor shunt.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.




Posted By: gudel
Date Posted: March 05, 2005 at 11:59 AM
thanks for the verification.





Print Page | Close Window