car alarm arm's its while driving

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=514
Printed Date: May 14, 2024 at 1:29 PM

Topic: car alarm arm's its while driving

Posted By: tj69_00
Subject: car alarm arm's its while driving
Date Posted: April 28, 2002 at 10:22 PM

i've had a vampire car alarm 4040 model car alarm and remote starter combo installed in a 91 eagle talon last week. everything was done by the book and everything, but when i disarm the alarm and take offf to drive the alarm will arm its a minute after i disarm it while i'm driving down the road. when i disarm it i dont get the two chirm sounds i should get, just the flashes and thats it. everything else works fine the remote starter works great. what is their to do?

Replies:

Posted By: Velocity Motors
Date Posted: April 28, 2002 at 10:32 PM

Make sure that the ignition wire is properly connected and make sure that the switched ignition wire that you got from the Eagle was infact a switched power and not a constant. Another ting is to make sure that the automatic arm is programmed off, but I would check the ignition wire first.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: scss
Date Posted: April 30, 2002 at 12:20 AM

Check

ignition wire for true ignition
Check your door trigers

Print Page | Close Window