Print Page | Close Window

1996 Voyager Factory Alarm Disable

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51409
Printed Date: May 07, 2025 at 9:12 PM

Topic: 1996 Voyager Factory Alarm Disable

Posted By: Komobu
Subject: 1996 Voyager Factory Alarm Disable
Date Posted: March 06, 2005 at 1:00 PM

Hi;
I installed an Autopage 855 in a 1996 Plymouth Voyager. I am using a 656 ohm resistor to unlock the doors, and a 4020 ohm to lock the doors. Is there a resistor value that will disable the factory alarm without unlocking the doors? To use the remote start, I have to pulse the system to deactivate the factory installed alarm (This unlocks the doors at the same time). Then the vehicle starts, lastly, the doors lock them selves. There is a period during the start up sequence that the doors are unlocked for 30-40 seconds. I would like the doors to remain locked during the whole sequence.

Thanks for any help
Pat

Replies:

Posted By: profuse007
Date Posted: March 06, 2005 at 1:20 PM

directfax #1081

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).

Posted By: Komobu
Date Posted: March 06, 2005 at 4:50 PM

Thanks...that helped a lot

Print Page | Close Window