Viper led 620v

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51425
Printed Date: May 02, 2024 at 11:05 PM

Topic: Viper led 620v

Posted By: IIrjII
Subject: Viper led 620v
Date Posted: March 06, 2005 at 6:47 PM

I just purchased the viper led 620v. I was wondering if anyone has every installed this. How do I install it cause the led does not have a plug that will just plug into the brain? I tried tapping into the red and blue wire off the alarm led and it didn't work. Any suggestions?

Replies:

Posted By: chris354
Date Posted: March 07, 2005 at 12:03 AM

You need to hook up the red wire to 12v constant, The black wire needs to go to the orange ground when armed wire. If starter kill is hooked up or anything else to the orange wire you will need to use diodes to isolate from each other.

-------------
Chris

Print Page | Close Window