Clifford ACG Garage Door Interface

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51521
Printed Date: May 08, 2025 at 2:10 AM

Topic: Clifford ACG Garage Door Interface

Posted By: Yoshi_D_Dino
Subject: Clifford ACG Garage Door Interface
Date Posted: March 08, 2005 at 10:33 AM

Hiya,

I have a Clifford ACG garage door opener.
Its the generation right before G4.

Question is, how do I delete all the remotes from its memory?

I tried what the manual says to push the remotes out by programming up the 8 slots. I've tried, but it doesn't seem to work.

Is there a trick to this?

Thanks!

Replies:

Posted By: Custom_Jim
Date Posted: March 08, 2005 at 1:20 PM

You need a throw away remote control and program that one in 8 times. Now the unit will only work with that throw away remote. You bust that one up so it is then no longer useable and your good ones do not work it.

It's one of those things, you need a remote to clear out the other ones.

The only other option is send it back to have the remotes cleared. Chances are they will use a remote they have, program it in 8 times and hopefully that remote will never get close to your reciever.

Jim

-------------
1968 Chevy II Nova Garage Find 2012
1973 Nova Custom
1974 Spirit of America Nova
1973 Nova Pro-Street

Posted By: Yoshi_D_Dino
Date Posted: March 08, 2005 at 4:20 PM

Hmmm, I tried that with another remote.

The only thing that happened was that it actived another channel on the receiver. It has 3 receiving channels.
i.e. it was programmed with channel 1, now its shifted to channel 3.

Not sure how this deleting or pushing works.

Posted By: OmarR
Date Posted: March 09, 2005 at 12:21 AM

Ignore all previous answers.

This is how you do it:

1. Remove power from the unit.

2. Press the blue program, and and KEEP PRESSING IT.

3. Re-connect power.

Done. All remotes have been cleared.

Posted By: Yoshi_D_Dino
Date Posted: March 09, 2005 at 9:40 AM

Hiya OmarR,

That's funny you should say that.

Yesterday I read the manual for the current version, the Directed 519H Garage Door interface.

In there, they detail a Zap Feature. This is the delete all procedure. Which is what you mentioned, press the program button and then power-up. Its deletes all the remotes. Its an undocumented feature missing from the Clifford ACG manual.

Worked like a charm.

Thanks!