Can the 451M control two 5 wire actuators

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51587
Printed Date: May 03, 2024 at 3:50 AM

Topic: Can the 451M control two 5 wire actuators

Posted By: yahooyahoo
Subject: Can the 451M control two 5 wire actuators
Date Posted: March 08, 2005 at 10:51 PM

I'm having problems figuring out how if it can. I am able to hookup the 451M with a two wire configuration and that works fine but when I go for 5 wire it doesn't work...Can anyone help?

Replies:

Posted By: daniel2002p
Date Posted: March 09, 2005 at 8:15 AM

how did you hook it up?

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: yahooyahoo
Date Posted: March 09, 2005 at 11:30 AM

Well I was able to make it work as a two wire. small ribbon cable obviously went to the alarm, purple wire went to +12V, blue and green went to lock and unlock (maybe not that order), white and brown went to ground. This worked as a two wire. I thought for the remaining three wires on the actuators I could hook the black to ground and then take the remaining two wires and hook them up to the white and brown on the DEI 451m instead of grounding those two. I am an amateur though and that isn't working for me. Any ideas?

Posted By: yahooyahoo
Date Posted: March 10, 2005 at 8:27 AM

Here is the wiring of the five wire actuator:

red - motor (+ve when opening)

Black - Ground (common)

Blue - motor (+ve when closing)

brown - opening trigger (-ve)

purple - closing trigger (-ve)

Posted By: yahooyahoo
Date Posted: March 10, 2005 at 10:00 PM

Can anyone help me?

Posted By: yahooyahoo
Date Posted: March 11, 2005 at 10:07 PM

Nobody?

Posted By: yahooyahoo
Date Posted: March 14, 2005 at 5:51 PM

I guess I'll just go ahead and set them up as two wire if nobody can help me. Thanks!