Print Page | Close Window

viper 690xv, '95 mustang

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51588
Printed Date: May 04, 2025 at 8:27 PM


Topic: viper 690xv, '95 mustang

Posted By: vette00057
Subject: viper 690xv, '95 mustang
Date Posted: March 08, 2005 at 11:55 PM

I recently purchesed a viper 690xv to install in my '95 mustang. Since I am a newbie in alarm installs I have a few simple questions.  I would also like to mention that i have read (and re-read) the directions and searched for posts relating to these questions. 

I understand that the horn honk feature pulses my existing horn.  I also understand that i can turn my 6 tone siren (from viper) into a single tone, so can an I have the horn honk feature pulse my siren?  Would it be lound like my horn?  I am asking this because i also want to get a piezo siren and figured it would be easier to hook up this way.  Also, if i am using only one piezo siren would I need a relay since it uses much less power?  Has anyone had experience with the DEI 513T mini piezo speaker, and if so, is it loud enough to be a pain generator?  Would two cause more "pain"?

I would like to thank everyone for their input, i have learned a lot on this website by reading many, many posts.

Brian




Replies:

Posted By: raydawg357
Date Posted: March 09, 2005 at 2:57 PM
you can have the horn honk feature pulse your siren with the aid of a relay.  The horn honk is (-) and the siren takes (+). 

-------------
Do it right the first time


Print Page | Close Window