Garage Door Opener Interface?
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51632
Printed Date: May 08, 2025 at 10:30 AM
Topic: Garage Door Opener Interface?
Posted By: Xlevel
Subject: Garage Door Opener Interface?
Date Posted: March 09, 2005 at 5:00 PM
I am looking for some type of device to open my garage door on another channel of my alarm system. I checked Clifford's website after seeing another post, but cam up empty there. Can someone point me in the right direction?
Replies:
Posted By: Xlevel
Date Posted: March 09, 2005 at 5:17 PM
I have done a search on here by the way and did find the DEI 519H, but it says it works with DEI products. Is there something I could do to make it work on my Compustar?
Posted By: SEXIFIED
Date Posted: March 09, 2005 at 6:07 PM
you need either a scrath code style remote or a dipswitch style alarm brain to be able to mate with the opener.
you can also use a second channel with another unit installed into your garage and code the compustar to the car aswell as the opener.
-------------
SWEET.
Posted By: Xlevel
Date Posted: March 09, 2005 at 7:39 PM
I was kind of thinking about just using a brain in the garage and just wiring up the power wires and the aux. trigger. That sounds like what you are recommending also. A bit expensive,but being able to open the garage door from 6000 feet sounds pretty good to me.
|