Having problem with my pager alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51733
Printed Date: May 17, 2024 at 7:16 PM
Topic: Having problem with my pager alarm
Posted By: ninety5teg
Subject: Having problem with my pager alarm
Date Posted: March 11, 2005 at 6:40 AM
I had my Black Widow 7150 (2 way pager) installed by a mechanic. He used the diagram that came with another Black Window alarm that was made 4 years ago Not pager alarm though).
My main problem is that the remote works fine, it starts the car and what not. But the pager does not do anything at all, it does show lock, unlock and when the car is started, other than that it does nothing! The pager works when it feels like working. The mechanic did use a wiring diagram from his computer for my 95 Integra. But my alarm system did not come with a wiring diagram for itself.
I hope someone can help me out and I would appreciated.
The alarm is: Black Widow 7150 w/starter kill and shock
sensor.
It is installed in my 95 Acura Integra Sedan (automatic).
Once again thanks!
Replies:
Posted By: swamprat323
Date Posted: March 11, 2005 at 7:58 AM
Contact Black widow for a manural
Black Widow
Posted By: ninety5teg
Date Posted: March 11, 2005 at 1:23 PM
thanks...but any other solutions?
|