2 stage shock sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51767
Printed Date: May 11, 2024 at 4:23 AM

Topic: 2 stage shock sensor

Posted By: spl/luxy
Subject: 2 stage shock sensor
Date Posted: March 11, 2005 at 6:49 PM

I have a Cyclops Alarm installed in my vehicle and i would like some information on the following:

Cyclops has Auxllary input for optional sensor (as above)

I would like to add a 2 stage shock sensor onto it, the wiring for the sensor (Autowatch) states to wire as follows:

Red- +12v.. Easy one that

Black- ground - almost easy..

Blue -Trigger, this is where i get a bit messed up,

green - Warning, should i join the green and blue together using a diode and then connect to the alarm trigger? if this isnt correct what should i be doing to get this to work?

-------------
Australia's Loudest Street Max 3-4 Car Ever!

Replies:

Posted By: Velocity Motors
Date Posted: March 11, 2005 at 6:59 PM

Here is what you should do: https://www.velocitymotorsport.com/images/install_notes/155.jpg

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: spl/luxy
Date Posted: March 11, 2005 at 7:27 PM

oh ok that is kind of what i thought, but this would mean that i would require 2 inputs to the alarm? or can i just use diodes on the one input?

thanks heaps for the help .... Dale

-------------
Australia's Loudest Street Max 3-4 Car Ever!

Posted By: gcorrea
Date Posted: March 12, 2005 at 12:26 AM

seperate inputs, one for the first stage and one for the second stage. only on dei products can you use only one input, because of the multiplex inputs.

-------------
gcorrea