remote start APS996a

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51893
Printed Date: July 18, 2025 at 8:18 PM

Topic: remote start APS996a

Posted By: prangel
Subject: remote start APS996a
Date Posted: March 14, 2005 at 8:55 AM

I had a APS996a alarm installed. My brother has a APS996c.
I read on this website that the only difference between these alarams is the wiring. The question I have is that my brother can start his truck manually with the key then let's say he wants to run in the house while the truck is running he can hit the remote start while the truck is running and take the key out to keep his for For Explorer sport running. When I try this on my '03 Dodge ram it does not work. Can my alarm be defective or not programmed right when it was installed? any info is appreciated

Pedro

Replies:

Posted By: daniel2002p
Date Posted: March 14, 2005 at 9:51 AM

you alarm has that same option too, to activate make sure that your foot is not on the brake and all the doors are closed, then press the start button twice and that should be it.

-------------
2005 Toyota Corolla S
1.8L VVT-i I-4
Always double check your wires with a DMM!!!
Do Not Use A Test Light!!!
MECP Certified Installer!
Best Buy 665 - IN IT TO WIN IT! TEAM MOBLE!

Posted By: prangel
Date Posted: March 14, 2005 at 10:51 AM

I have tried it numerous times and I cannot get it to work. My brother aslo tried it without any success. The same person installed both of ours. He told me to bring it buy to take a look at it. I just can't take it to him until next week so I was trying to see if I can find any solutions before I take it back to him.

Posted By: misterjimbo
Date Posted: March 16, 2005 at 2:33 PM

it will not work if it is set up for voltage ie tachless operation. have him run a tach wire and learn it , turn on the tach mode and you are all set

-------------