anyone have a 93 acura integra alarm install wiring diagrams? colors one the wires and description? also.. my 98 accord i have a immobilizer can i install an aftermarket alarm? do I need a transponder? what is it and which wire do you connect it through? thanks
| ITEM | WIRE COLOR |POL| WIRE LOCATION |
| 12V|white or wht/blk |+ |ign harness or fusebox |
| STARTER|BLACK/ white |+ |ign harness or fusebox |
| IGNITION|BLACK / YELLOW |+ |ign harness or fusebox |
| SECOND IGNITION|blue/white |+ |ign harness or fusebox |
| ACCESSORY|yellow |+ |ign harness or fusebox |
| POWER LOCK|GREEN / WHITE |- |either kick panel *1 |
| POWER UNLOCK|GREEN/ red |- |same |
| PARKING LIGHTS +|RED / green | |steering column |
| HEADLIGHTS|RED / yellow |+ |steering column |
| DOOR TRIGGER|GREEN/ red *2 |- |dr kick panel/fusebox |
| DOME SUPERVISION|use door trigger | | |
| TRUNK/HATCH PIN|GREEN/ black |- |dr kick panel/fusebox |
|TRNK/HTCH RELEASE|manual | | |
| TACHOMETER|blue | |distributor |
| SPEED SENSE|yellow/red | |instrument cluster |
| BRAKE WIRE|GREEN / WHITE |+ |brake pedal switch |
| HORN TRIGGER|blue/red *3 |- |steering column |
| WIPERS|blue and blu/yel |- |at switch |
| LF WINDOW UP/DN|RED / blu - RED / yel |A |in drivers door |
| RF WINDOW UP/DN|blu/grn - blu/yel |A |in drivers door or dkp |
| LR WINDOW UP/DN|green - grn/yel |A |in drivers door or dkp |
| RR WINDOW UP/DN|yel/grn - yellow |A |in drivers door or dkp |
| RADIO 12V|WHITE/ blue |+ |radio |
| RADIO GROUND|black |- |radio |
| RADIO SWITCH|yellow/red |+ |radio |
| RADIO ILLUMINATE|RED / black |+ |radio |
| POWER ANTENNA|yellow/white |+ |radio |
| LF SPEAKER|blu/grn - gry/blk | |radio |
| RF SPEAKER|RED / grn - brn/blk | |radio |
| LR SPEAKER|blu/yel - gry/wht | |radio |
| RR SPEAKER|RED / yel - brn/wht | |radio |
Notes:
*1 Easier to locate at passenger kick panel. On drivers side, wires are located high in kick panel.
*2 Looks like a 14 awg. wire, but is mostly insulation.
*3 High-current ground. Use a relay when interfacing with this circuit.
wow thanks for the quick reply.. when installing the alarm. do I have to cut off any wires.. or can i use t-taps for all of them?
As for the Accord.... you only need a transponder bypass module if you are adding a remote starter to the vehicle.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA