Print Page | Close Window

2003 Lancer Clutch bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=51989
Printed Date: April 30, 2024 at 10:07 AM


Topic: 2003 Lancer Clutch bypass

Posted By: Dragorus
Subject: 2003 Lancer Clutch bypass
Date Posted: March 16, 2005 at 9:31 AM

Have an 03' lancer with no apparent switch on or near the clutch....Need info to bypass it for Remote Start.....



Replies:

Posted By: Bmnicolosi
Date Posted: March 16, 2005 at 10:28 AM
there has to be a pin of some sort that has wire going to it either in front of the cluth or behind it.

-------------
If you say "I already know how", don't ask me a single question.




Posted By: profuse007
Date Posted: March 16, 2005 at 10:54 AM
look further up, its there.

-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).




Posted By: Velocity Motors
Date Posted: March 16, 2005 at 10:56 AM

BLUE/ORANGE at the switch. This is a type 4 system where you have the break the connection in order for the clutch to activate. Use a SPDT relay a wire like this:

  • 86 : (-) status wire/ground out when running
  • 85 : (+) starter wire from RS
  • 87a : Switch side of the clutch wire ( BLUE/ORANGE) This wire you have to cut in half
  • 30 : Clutch side of the clutch wire ( BLUE/ORANGE ) This is the otherside of the cut wire.
  • 87 : NOT USED


-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA




Posted By: cutter1122
Date Posted: March 16, 2005 at 11:24 PM
posted_image Clutch bypass: Open White wire with a relay during remote start. See diagram for proper connection (N/C
        system)





Print Page | Close Window