toyota 4runner stock keyless

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52029
Printed Date: May 13, 2025 at 4:02 AM

Topic: toyota 4runner stock keyless

Posted By: mr dibb
Subject: toyota 4runner stock keyless
Date Posted: March 16, 2005 at 9:35 PM

I just finished putting in a viper remote start in my truck, i love it, it works perfectly. The only problem is that my stock keyless entry will not work when the car is on. The keyless entry relay is in the back tailgate. I spent hours trying to find a wire that would make it work when the car is on. Is there any way I can get the stock keyless to work when the engine is on, either through programming, or wiring,(maybe hook some wire up to the ignition output of the viper?) Please help me, this is getting very annoying. THANKS!!!!

Replies:

Posted By: mr dibb
Date Posted: March 16, 2005 at 11:00 PM

ok, well i was out there fooling around, and figured out that if I take out the ecu ig fuse, the keyless works no matter what position the key is in. I have not tried starting the truck yet, will this even work? I would be taking the output from the viper and hooking it up to this, therefore it would not be getting voltage during remote start. I tried earlier removing the ig fuse, and the truck would start, but then shut off. What will removing the ecu ig fuse do? what systems run off of this? Thanks

Print Page | Close Window