Print Page | Close Window

Power window + switch + shaved door kit=?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52097
Printed Date: May 15, 2025 at 1:54 AM


Topic: Power window + switch + shaved door kit=?

Posted By: JhnBrackett
Subject: Power window + switch + shaved door kit=?
Date Posted: March 18, 2005 at 1:06 AM

Shaved Door Kit - Spal 7 channel, channels 3-7 are negative output. 

I would like to know how to wire in power windows with a switch.  I've got the instructions to wire the power windows w/ a relay, but no switch.  Is an STDT relay ok to use?  And will I need 1 per window?

How can I wire the system up with a switch and remote control?  Also, from reading around it sounds like the windows will only go up or all go down, and that 2 relays are needed per window to do it up and down.  Anyone help me figure otu the best way to have the remote available to do both?  I assume I'd need to use channel 3 & 4 (up/down).   Then do the exact opposite for each direction.  But the switches still get me.   Thanks for any help. 




Replies:

Posted By: dare_ds69
Date Posted: March 18, 2005 at 5:50 PM
that you need is the 530t from DEI thas a window mudule (up/down) is easy to install

-------------
how own your mind, control your life.
MECP certified. always use a DMM




Print Page | Close Window