Print Page | Close Window

Few questions about Jetta

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52160
Printed Date: July 19, 2025 at 11:00 PM


Topic: Few questions about Jetta

Posted By: spdowell
Subject: Few questions about Jetta
Date Posted: March 19, 2005 at 1:06 AM

I have a 03 jetta with a 791xv installed. I'm putting in a pulse timer for the wait to start light, and while it is apart again I need to fix my door triggers. Can anyone explain to me how exactly to wire these triggers? I know they need to be diode isolated, but am not sure about the rest, and since they are (-) trigger, which way should I install the diode? Thanks in advance to everyone.
Sean



Replies:

Posted By: extreme1
Date Posted: March 19, 2005 at 1:41 AM
12 VOLTS      red      +      ignition harness                  
STARTER 1      RED / black      +      ignition harness                May be RED / Gray
IGNITION 1      black      +      ignition harness                
ACCESSORY 1      BLACK/ red      +      ignition harness                
     
POWER LOCK      yellow/blue      -      driver door module                
POWER UNLOCK      YELLOW /GREEN      -      driver door module      IN950812           Single Pulse Unlock Driver Door and Disarm Alarm Double Pulse Unlock All Doors To Relock Driver Door During Remote Start, Use (-) Start Wire From Relay Harness To Door Lock Wire. Diode Isolate.
FACTORY ALARM ARM      yellow/blue      -      driver door module                Arms with Lock
FACTORY ALARM DISARM      YELLOW /GREEN      -      driver door module                Disarms with Unlock
     
PARKLIGHTS POSITIVE      grey/red & grey/black      +      driver kick                
BRAKE      RED / black      +      at switch or driver kick                
     
DOOR PIN      BROWN / white      -      in each door at module                
HOOD PIN      BROWN / red      -      comfort module                Comfort Module Located Left Of Steering Column, Above Fuse and Relay Box.
     
TACH      white      AC      front of engine                There is a 3-Pin Connector Behind Vacuum Pot on Front Of Engine.
GLOW PLUGS      blacl/stripe      +      at glow plugs                Use Any One Of Four Wires Going To Glow Plugs Behind Vacuum Pot on Front Of Engine.
     
HORN      BLACK / YELLOW      +      comfort module                Can Also Find Behind Fuse/Relay Box

-------------
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta





Print Page | Close Window