i m installing compustar on 03 accord
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52218
Printed Date: June 01, 2024 at 12:28 PM
Topic: i m installing compustar on 03 accord
Posted By: jag
Subject: i m installing compustar on 03 accord
Date Posted: March 20, 2005 at 9:36 AM
guys help me installing compustar fm8000 where do i put start kill wire which is the easy and best way to bypaas impo system where do i put lock unlock wire since its out put is negative and i need positive for lock unlock finally my remote transmeter doesnt communicate with the brain even after programming I HAVE DONE ALL OTHER WIRINGS AND CAN HELP YOU OUT WITH TMEM IF ANYBODYz INTERESTED
Replies:
Posted By: Velocity Motors
Date Posted: March 20, 2005 at 9:47 AM
The starter disable/anyi-grind wire you have to attach the YELLOW wire from the relay to the MOTOR side of the starter wire ( cut starter wire in half ) and the YELLOW/BLACK wire you have to go to the other side of the cut starter wire. For the immobilizer system we use the PKH3 system for bypasssing it. The lock/unlock wires are not (+) they are (-): - POWER LOCK|pink/black |- | grn plug, L side of fusebox , These wires will meter when using the passenger door lock switch.
POWER UNLOCK|pink/blue |- | grn plug, L side of fusebox, These wires will meter when using the passenger door lock switch.
Do you get the confirmation flash and chirp after toggling the ignition 5 times ?? ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: jag
Date Posted: March 20, 2005 at 10:43 AM
yes it chirped but transmeter didnt learn the code or didnt work but then in the switch and jumper settings it said( JUMPER WIRE uncu=manual tran and CUT= AUTO trans. so i cutted it and after now it doesnt chirp or lights doesnt blink when i go into programming by turning on and off the ignition) on my lcd trans. all i see is phone sign, time and when i press first button it shows anteena sign without any signal bars. i havent attached tach wire or yellow and blue wire coming from relay. but it cant be the cause right? thanks for the feed back jeff
Posted By: jag
Date Posted: March 20, 2005 at 11:25 AM
another thing just to make sure tach wire is blue or blue/red wire. I am having hard time finding this wire. how do i check it if its the right one? they say its 31 pin connector on transmission. i ll appreciate the help. I can help out with any other wire that i installed if anyone s having difficulties
Posted By: jag
Date Posted: March 20, 2005 at 2:28 PM
ok never mind problem was i was connecting RED / black as an accessory( which only gets +12 on ignition) now i connected WHITE/ red as an accessory and BLACK/ red as a 2nd accessory and remote is working i still have to put tach wire and lock/ unlock wire i couldnt find pink/blue and pink/black wire
Posted By: dfiddy
Date Posted: March 20, 2005 at 2:33 PM
Tach is easily accessable from the passenger side. It's in the center console at a white plug closest towards the firewall If I remember correctly. There is only 2 maybe three wires that are the same color. One of the blue/red's should do it. I haven't done one in a while...but I hope that helps... PM me if ya need to. I'll be happy to help.
peace out
Posted By: jag
Date Posted: March 20, 2005 at 3:04 PM
I ve just noticed that if i am installing this unit on automatic transmission then i have to attach this wire to ALTERNATOR SENSING wire which shows 5v when keys in on but not started and 9 to 14v when vehicle is started. is TACH SENSING AND ALERNATOR SENSING IS SAME?
Posted By: profuse007
Date Posted: March 20, 2005 at 5:06 PM
AT/MT cars able to use either tach or alt sense.
no its not the same.
-tach sense is reading the speed of ur engine.
-alternator sensing is readin teh voltage supplies by the alt via batt to see if its at a stable voltage. if the compustar sees the voltage drops, the compustar will shut off.
theres more info to those two features, look at the install manual.
jag] < wrote:
>I ve just noticed that if i am installing this unit on automatic transmission then i have to attach this wire to ALTERNATOR SENSING wire which shows 5v when keys in on but not started and 9 to 14v when vehicle is started.
is TACH SENSING AND ALERNATOR SENSING IS SAME?
------------- Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
|