VALET REMOTE START MODEL 551T

Anyone ever installed the "VALET REMOTE START MODEL 551T" its made by dei...  is it any good?  anyone have wiring diagrams for this or install diagrams?   thanks   I know its a "addon" to my stock alarm.. 

tabo

i use dei add ons all the time they are good check this out

primary harness

black -ground ,  WHITE/ blue -negative activation input. , lt GREEN/ black - factory disarm, yellow -output to security system , this wire must be connected to the ignition wire of current alarm instead of the alarm being connected to the cars ignition wire , if you dont do this the alarm will not work right while in remote start mode such things like door locks.  white- negative light flash output  if you want to opperate lights you need to convert this to possitive using a relay like this pin 87a not used. pin 86and pin 87 constant fused 12 volts pin 30 output to parking light wire. grey/black wait to start  (for deisel engines.)

heavy guage relay satelite wires

reds - 12 volt constant , pink- igniton one,  purple- starter wire, orange - accesory wire. pink/white- second igniton  or if no second ignition is needed than you can use this as your light flash output wire instead of white wire after relay.

6 pin harness:  blue- not used  blueblack- not used . grey hood pin switch not neccesary but this wire can not see ground, if you want to remote start, violet /white  tach wire needed or timed remote start is neccesary. brown- wire possitive brake shut down.  BLACK/ white  neutral safety this wire must see ground in order for the remote start to work . word of advise , ground it permenantly.

or https://www.directed.com/guides/pdfs/N551T.pdf

acrobat reader is required.