Print Page | Close Window

shock sensor not working right

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52243
Printed Date: July 05, 2025 at 4:54 PM


Topic: shock sensor not working right

Posted By: t HALL
Subject: shock sensor not working right
Date Posted: March 20, 2005 at 8:13 PM

I have commando 520-s alarm when i hookrd up my doors my shock sensor stop working when i unhook my doors it works what am i doing wrong



-------------
Thanks TIM



Replies:

Posted By: thepencil
Date Posted: March 21, 2005 at 10:41 AM
What year and model is your vechile?

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image




Posted By: t HALL
Date Posted: March 21, 2005 at 9:49 PM
It's a 2005 pt cruiser

-------------
Thanks TIM




Posted By: thepencil
Date Posted: March 22, 2005 at 8:16 AM
t HALL wrote:

I have commando 520-s alarm when i hookrd up my doors my shock sensor stop working when i unhook my doors it works what am i doing wrong




What kind of wires are you hooking up to the doors to make the shock sensor stop working? On all door(s) or just one particular door that is causing this?

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image




Posted By: t HALL
Date Posted: March 24, 2005 at 7:38 PM
Thanks for your help i think i fount out what was wrong i was using the wrong wire and i needed a diode

-------------
Thanks TIM





Print Page | Close Window