pro start ct-3300 problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52245
Printed Date: May 31, 2024 at 9:17 AM

Topic: pro start ct-3300 problem

Posted By: kellyjscott1
Subject: pro start ct-3300 problem
Date Posted: March 20, 2005 at 8:22 PM

Hi there i am having a problem with my ct-3300 remote starter, it was working fine, now it will not start my truck at all, when i push the start button on my remote it just flashes my park lights 10 times continuiously, when i checked my manual that came with it, it says (10 flashes)=The hood switch line went to ground during cranking or run time? can anyone please explain to me just what that means, it is in a 2003 chevy s-10 crew cab truck any help would be greatly appreciated.

p.s i know now that this unit is junk so you don't need to tell me.

Replies:

Posted By: Velocity Motors
Date Posted: March 20, 2005 at 8:35 PM

That means that the pin switch in the hood is touching the metal ( hood is open ) and this is a safety feature taht will not allow you to remote start the vehicle if the hood is up. If you recently washed the truck the water will conduct voltage and ground the switch. Look for a pin switch in the hood along side the fender's or in the front of the frame area and dry it off or readjust the height of the pin higher.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: kellyjscott1
Date Posted: March 21, 2005 at 1:48 AM

Thanks Jeff i readjusted my hood pin switch and now my remote strter is now working!

Posted By: Velocity Motors
Date Posted: March 21, 2005 at 11:24 AM

No problemo posted_image

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA