Print Page | Close Window

Moved Antenna - Alarm LED is Solid

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52292
Printed Date: May 16, 2025 at 4:39 AM


Topic: Moved Antenna - Alarm LED is Solid

Posted By: Mbinc
Subject: Moved Antenna - Alarm LED is Solid
Date Posted: March 21, 2005 at 2:05 PM

Car: Honda Civic 2003
Alarm: Python 1600XP

Yesterday I relocated my antenna to above the rear view miror because my range wasn't very good. I unplugged it, ran the wire through the pillar plugged it back in and i'm getting much better range. The problem i'm running into is my status LED is staying solid when the key isn't in the ignition. When I arm/unarm the siren doesn't beep (when it used to), but the parking lights flash. I don't think the alarm is arming because i've armed the alarm, and unlocked the door using my key and the alarm doesn't go off. Any ideas on what I might have done to cause this?




Replies:

Posted By: Mbinc
Date Posted: March 21, 2005 at 3:00 PM
oh i'm stupid it was in valet mode. i was soooo paranoid that i messsed up something. thanks! tho


Print Page | Close Window