Using CS FM-2009 aux to open door
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52336
Printed Date: May 12, 2024 at 7:33 AM
Topic: Using CS FM-2009 aux to open door
Posted By: dj_skillz
Subject: Using CS FM-2009 aux to open door
Date Posted: March 21, 2005 at 10:58 PM
Hey guys, I got a CS FM-2009 from asian wolf and am not using the aux. I am going to install a SPAL solenoid kit for my doors. How would I use my aux to open my passenger door without losing the funtionality of the remote the SPAL kit came with. I'm thinking that I'm supposed to split the positive on the solenoid. One end goes to the realy for the aux on the CS FM-2009 and the other goes to channel 1 on the SPAL. Correct me if I'm wrong....
Replies:
Posted By: Velocity Motors
Date Posted: March 22, 2005 at 6:44 AM
You can use one relay instead and diode isolate the trigger's from each other. Chances are they are both going to be (-) trigger. ------------- Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dj_skillz
Date Posted: March 22, 2005 at 8:58 AM
Thanks, but the SPAL has built in relays for channel 1 and 2 (driver and passenger side door). Any other suggestions?
Posted By: Velocity Motors
Date Posted: March 22, 2005 at 12:38 PM
The CS2009 will be using a (-) output to control a relay and you can use this relay and piggy back the SPAL wire for the unlock or lock function.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dj_skillz
Date Posted: March 22, 2005 at 9:40 PM
dunno if that's gonna work, here 
Posted By: Velocity Motors
Date Posted: March 22, 2005 at 10:16 PM
87 has to be 12 volts as well in order for this to work. Otherwise the relay is correct.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dj_skillz
Date Posted: March 22, 2005 at 10:44 PM
Thanks. oh, btw....12V constant or acc?
Posted By: Velocity Motors
Date Posted: March 22, 2005 at 10:47 PM
Use constant.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: dj_skillz
Date Posted: March 22, 2005 at 10:57 PM
sweet..are you gonna be in Winnipeg anytime soon? Maybe u can help me out with this install. I've never done anything like this before, but I'm a pro at wiring head units and amps. Otherwise, I will try by myself and pray that I don't fry anything  !
|