Boot (Trunk) Release 686

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52446
Printed Date: July 14, 2025 at 8:47 PM

Topic: Boot (Trunk) Release 686

Posted By: EEZA
Subject: Boot (Trunk) Release 686
Date Posted: March 23, 2005 at 2:42 PM

Hello guys :

Quick question I have a Giordon 686 aoto start alarm I am happy with the features on this bit of kit and the alarm works fine. I would like to use the remote engine start function button to open the boot on my wifes car (UK = bad news for auto starters).

I can get hold of an appropriate solenoid but what about the alarm function.. Can this be done ?

Many thanks Eric

Replies:

Posted By: Acuraxtasy
Date Posted: March 23, 2005 at 8:22 PM

Do you use the remote start feature of the alarm or not? If you do, you need a second channel to pop it (this is the best way). If you don't you can use the starter output wire it is the only one that shuts off after being energized. Make sure you read your instruction manuel before attempting it some alarms remote start will not work until the tach wire has been learned

Posted By: EEZA
Date Posted: March 24, 2005 at 3:11 AM

Ok thanks for that I will have a look later on today Cheers...

Print Page | Close Window