Print Page | Close Window

viper 791XV

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52507
Printed Date: May 12, 2025 at 7:45 AM


Topic: viper 791XV

Posted By: italnpimp59
Subject: viper 791XV
Date Posted: March 24, 2005 at 10:53 AM

just got it and im about to take my old viper alarm out and put this one in my Jeep today.  the question is that ive heard of being able to use extra channels to control garage door openers.  is there an extra module i have to buy to make this happen or is there some way to just program my alarm to my garage door opener?  thanks in advance!

-------------



Replies:

Posted By: ken984
Date Posted: March 24, 2005 at 9:33 PM
Yes there is a module that interfaces with the door opener I am not sure about it working with the new 2 way systems though. I can look in my catalog tomorrow if noone else can give you a definite answer.



Posted By: TheSaint421
Date Posted: March 25, 2005 at 1:33 AM

I don't know of the module you are talking about, but there is a way to do it without spending more than 5 bucks. go to your local auto parts store, and get a SPDT relay. take the cover off your garage remote, and connect the relay to the switch, and have a channell on the alarm trip the relay...

Mark




Posted By: italnpimp59
Date Posted: March 27, 2005 at 11:13 PM
how can i program my alarm to trip the relay though? 

-------------



Posted By: italnpimp59
Date Posted: March 27, 2005 at 11:15 PM
oooooooooooh ok nevermind..i figured it out!  thanks

-------------


Print Page | Close Window