Alarm arms and then goes off
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52543
Printed Date: May 14, 2025 at 9:24 PM
Topic: Alarm arms and then goes off
Posted By: Craiger22
Subject: Alarm arms and then goes off
Date Posted: March 24, 2005 at 11:44 PM
I recently installed a crimestopper alarm. It worked right for a day but now when you arm it it starts going off after about 15 seconds. Any help will be greatly apreciated.
Replies:
Posted By: nava94
Date Posted: March 24, 2005 at 11:53 PM
more information is what we need for us to help you. first off what's the cars year, make, model?
Posted By: Craiger22
Date Posted: March 24, 2005 at 11:57 PM
it is a 97 jeep wrangler, the alarm has sensors for the doors and hood, and it also has a dual stage shock sensor
Posted By: nava94
Date Posted: March 25, 2005 at 12:36 AM
did you double check your wiring with a digital multimeter. correct 12volts, ignition, door trigger, parking lights, etc. did you install a hood pin? does the jeep have a factory alam?
Posted By: Craiger22
Date Posted: March 25, 2005 at 12:53 AM
I did not check my conections because it started out working fine, there was no factory alarm to my knowledge, and no i did not install a hood pin, i used the factory positive pin and added a relay to it as it stated in the manual
Posted By: Craiger22
Date Posted: March 25, 2005 at 2:04 AM
Ok i found the problem, it was my satellite radio, it wasnt turning completely off and it waa drawing too much current and setting off the alrm. Thanks for all the help.
|