Help with Viper 791 XV Remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52547
Printed Date: May 15, 2025 at 3:54 AM

Topic: Help with Viper 791 XV Remote

Posted By: CaviHItts
Subject: Help with Viper 791 XV Remote
Date Posted: March 25, 2005 at 8:50 AM

The battery on the remote for my Viper 791 was low so I replaced it. I went into the program mode (when you hold all 4 buttons down) because I couldn't remember if it saves the settings for page on/off, vibrate/beep, and illumination). I accicently hit the AUX while in program and the hood and trunk icon appeared. It would alternate between the 2 if I hit the button again. I don't know what I did. Can anyone tell me what I did and how to fix it.?

Thanks in advance

Replies:

Posted By: JWorm
Date Posted: March 25, 2005 at 10:51 AM

It changes what the blue multiplexed input trigger wire shows for a zone on the remote. Arm your alarm and open the trunk. What zone does it show? Arm your alarm and open the hood. What zone does it show?

Print Page | Close Window