Print Page | Close Window

Alpine Radar Sensor Connection

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=52548
Printed Date: May 15, 2025 at 10:10 AM


Topic: Alpine Radar Sensor Connection

Posted By: 71machone
Subject: Alpine Radar Sensor Connection
Date Posted: March 25, 2005 at 9:27 AM

I have an Alpine SEC-8028 alarm system and would like to connect an Alpine SEC-8345 radar sensor to it. The wiring on the radar sensor is:

YEL/GRY  (Radar Power), GRY/BLU   (Radar Control),  GRY  (Radar Trigger), BLK  (Ground).

I have the ground figured out but where do the radar control, radar trigger and radar power wires connect on the 8028? I'm very new at this and any help is greatly appreciated. Thanks.



-------------
71Mach



Replies:

Posted By: moshpitmickey
Date Posted: March 28, 2005 at 7:53 PM

Radar Power is 12 volts constant.

Radar trigger will hook up to a - trigger input on the alarm.

Radar control should be hooked to the blue/white wire from the alarm. This wire should turn the sensor on when the alarm is armed.



-------------
moshpitmickey


Print Page | Close Window